Another RTX 5090 has been reported with a melted 16-pin connector, adding to the already-long list of such incidents. Fortunately, the GPU-side connector remains intact, as verified by the Redditor. However, the yellow-tipped cable, which was ironically designed to aid users in seating the 12V-2×6 cable properly, was heavily charred, far more so than an overdone brisket.
Based on the details we gathered, the Redditor was sporting an MSI Gaming Trio RTX 5090 powered by the Corsair HX1500i (ATX 3.1 compliant), which has been in use for around two months. The GPU was powered through MSI’s yellow-tipped 4x 8-pin to 16-pin adapter instead of the native 16-pin to 16-pin cable, mirroring another case we covered previously.
The user didn’t explicitly confirm whether the cable was properly seated, which makes it hard to draw a firm conclusion. However, we should keep in mind that this connector features a yellow tip that stays visible until the cable is fully inserted. Similar to the previous case, the cable is visibly burnt along an entire row of 12V terminals. The damage is so prominent, I initially thought the black and yellow apperance was part of MSI’s design.
You may like
- Another RTX 5090 connector melts down, reportedly taking a PSU with it
- Nvidia RTX 5090’s 16-pin power connector hits 150C in reviewer’s thermal camera shots
- Nvidia power meltdowns hit 8-pin adaptors — old power supplies are the common factor
A quick look at the GPU-side connector shows no visible damage, and a replacement cable verified this. Most of these issues can be traced back to Nvidia’s electrical design choices for the reference board designs of their RTX 40 and RTX 50 series GPUs. 12VHPWR implementations with high-end RTX 30 series models included three shunt resistors, allowing the GPU to read the six 12V pins as three individual inputs.